FREQUENTLY-USED FUNCTIONS
19
5.6 Event Search
Note: This function is not available for “NORMAL” and “GUEST”. For details, please refer to “5.4 User
Level Creation” at page 17.
In the playback control bar, click to enter the search list.
EVENT INFORMATION
QUICK SEARCH
18 24
EXIT 15 : 20 SUBMIT
To quickly search the time within which might include the recorded data you want to see:
- Select the channel(s) and month you want to search. You’ll see the date(s) with recorded data is highlighted.
- Select the date you want to search. You’ll see the time with recorded data is highlighted from the timeline bar.
- Click the time to start playback.
To search the recorded data by event, select RECORD / MOTION / ALARM / TIME, or select FULL to show all the
event logs. Select the log you want to start playback.
Note: During video playback, you might click to check the recorded data details, or click to play
the recorded audio (if any) on the channel you want.
5.7 Video Backup
Note: This function is available for “SUPERVISOR”. For details, please refer to “5.4 User Level Creation”
at page 17.
Note: Before using the USB flash drive, please use your PC to format the USB flash drive to FAT32
format first. For the list of compatible USB flash drives, please refer to “APPENDIX 2 COMPATIBLE
USB FLASH DRIVE LIST at page 44.
Note: For video backup, please use USB flash drive or back your data up over the Internet. It’s not
recommended to connect the HDD to your PC directly.
To copy recorded data for video backup, click (SYSTEM), and select “BACKUP DATA (USB)”.
SYSTEM
ACCOUNT
START DATE 2009/NOV/19
TOOLS
START TIME 08:30:21
SYSTEM INFO
END DATE 2009/NOV/19
BACKUP DATA (USB)
END TIME 17:59:29
BACKUP LOG (USB)
CHANNEL
To Next Page
Loading...
