9
Function Description
Verify Password Some mail servers are required to verify the password. Please enter the user name and password.
E-Mail Address List Add the e-mail address(s) of the assigned recipient(s).
Test When all information is entered, click Test Mail to try if the receipt.
3.2.7 SMS
Note: Before using this function, you need to apply an API ID from the mobile messaging company,
Clickatell, and you will be charged starting from the 11
th
message. For details, please refer to
APPENDIX 4 API ID APPLICATION FOR SMS MESSAGING at page 25.
Enter the detailed information needed for text messaging, and click Save to confirm. The information you set
here will be applied when SMS is selected in General "Trigger".
Function Description
System The text messaging service provider is Clickatell.
User name / Password Enter the account user name and password you created in Clickatell.
API ID Enter the API ID you applied from Clickatell.
Recipient Click Add to enter the phone number, including the country code, to receive the text
message. Five sets of phone numbers are allowed.
Transfer Interval Set the interval time in minutes between two-message sending.
The options are 0, 15, 30 & 60.
Reset Counter Click to restart the text messaging, and the SMS will be sent after the specified time interval
since you click this button.
Message Enter the text content (up to 70 characters) you want to send with the text message.
Test To know whether your SMS setting is correct, click this button to immediately send a SMS to
your phone.
Note: This testing is not free and you will be charged for SMS sending base on your
local rate.
To Next Page
Loading...
Need help?
General
