2
2. CAMERA ACCESS WITH INTERNET EXPLORER
This network camera can be accessed via Microsoft® Internet Explorer® and iPhone / iPad / Android mobile devices
with our self-developed program EagleEyes installed depending on different using situations.
Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please
refer to http://www.eagleeyescctv.com.
Before using the camera, make sure you have configured the network settings, and the network connection is fine.
For network configurations, please refer to:
Quick Setup With iPhone / iPad supplied with your camera if youre using iPhone / iPad, and your network
environment is wireless.
ADVANCED NETWORK SETUP downloadable from www.surveillance-download.com/user/m357a.swf
if your
network environment is not wireless.
2.1 Camera Login
Step1: Open your web browser, and key in http://ipaddress:portnum in the URL address box.
For example, for the IP address 60.121.46.236 and port No. 888, please key in http://60.121.46.236:888 into
the URL address box, and press Enter.
Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click LOGIN.
Step3: The wizard is then started.
To skip the wizard and directly access the camera live view, click Close.
To directly access the camera live view without starting the wizard for the login next time, check Do not start wizard at login.
Note: If youre prompted to install VLC player, Software and H264 Streaming Viewer, please
agree to proceed the installation.
Step5: When the login is successful, the live view is shown.
2.2 Control Panel Overview
Note: The buttons available depend on the user level used to log in.
To Next Page
Loading...
Need help?
General
