Avtech Room Alert - Configuration; Alert Methods; Email

10 AVTECH Software Inc.
Conguration & Setup Screens Room Alert Signal Tower
Conguration And Setup Screens
Alert Methods
The Room Alert Signal Tower unit can send alert notications via email and email-to-SMS using
anonymous SMTP relay and/or SNMP Traps. The Room Alert Signal Tower unit is fully SNMP
compliant and can be accessed by any application that can issue a SNMP Get request. PageR can
therefore be used to perform SNMP Get requests and receive SNMP Traps.
Email
The ‘SMTP Email’ section displays settings to allow Room Alert Signal Tower to send Email Alert
Notications when alert thresholds are exceeded. In order to enable email alerting from the Room Alert
Signal Tower web server interface, your mail server must have ‘SMTP Relay’ enabled for either your
network or the IP address of the Room Alert Signal Tower ID Box. Contact your Network Administrator
if you need assistance in doing this.