Avtech Room Alert - Additional Screens And Interfaces; Network and Security Configuration

22 AVTECH Software Inc.
Additional Screens And Interfaces Room Alert Signal Tower
Reset Defaults
If you wish to return the Room Alert Signal Tower to the factory default conguration, click the
‘Reset Defaults’ link on the left menu. A prompt will display conrming that you want to reset the
factory default settings. Clicking ‘Yes’ will erase all settings and return the unit to its factory default
conguration.
Help
The Room Alert Signal Tower ‘Help’ screen provides links to online support and information resources
for the Room Alert Signal Tower as well as information regarding telephone and email support. Directly
below the ‘Room Alert Signal Tower Help’ heading will be the current rmware version that is installed
on the Room Alert Signal Tower unit and its release date. The link entitled ‘Click Here To Check For
Updates’ can be used to check if the rmware version installed on the Room Alert Signal Tower unit is
the most current (requires internet access). The additional support information provided on this screen is
presented in the order that it should be followed in the event that you have a technical question regarding
the Room Alert Signal Tower or if you are experiencing a situation where assistance is desired.
About
The Room Alert Signal Tower ‘About’ screen provides general links and contact information for
AVTECH Software sales, support and websites. The rmware version that is currently installed on the
Room Alert Signal Tower unit will also be listed with the date released directly below. The link entitled
‘Click Here To Check For Updates’ can be used to check if the rmware version installed on the Room
Alert Signal Tower unit is the most current (requires internet access).