1.
Research, plan and prepare the optional accessories & tools.
Duct venting and accessories (NOT INCLUDED)
• If for new installation or your old range hood doesn’t have exhaust duct, prepare
to cut the openings through the bottom of the cabinet, wall, or top cabinet to
ceiling. The 8” round ducts are NOT included (Recommend to purchase 8”
semi-rigid aluminum ducts). Refer to Section 5 VENTING METHODS for
detail.
• Check the existing exhaust duct size. If not 8” round metal duct, try to
get the converter / reducer / adapter / elbow as shown in the pictures.
• The air damper is NOT included.
• Also prepare the cutting tools (jig saw or reciprocating saw), screw drivers or power drill, level,
measuring tape, knife, duct/foil tape, screws, marker/pencil, etc.
• 2 people are required for the installation.
To Next Page
Loading...
