EasyManua.ls Logo

Awoco SP-06 - User Manual

Awoco SP-06
11 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Range Hood
OWNER'S MANUAL
In-Line Split Blower Unit
Test Run
Before
Installation
Optional Control UnitOptional Awoco Split Hood Unit
Ver. RH-SP-BLW-2020A

Table of Contents

Questions and Answers

  • E
    Edward WilkersonJul 28, 2025
    Why is my Awoco Ventilation Hood not venting out properly?
    • P
      Patricia DavisJul 28, 2025
      Several factors can affect the venting performance of your Awoco Ventilation Hood. First, ensure the distance between your stove top and the hood's bottom falls within the recommended 24” to 30”. Note that this might not apply to all ceiling configurations. Also, minimize the number of elbows and the length of ductwork, and verify that all joints are correctly connected, taped, and sealed. Finally, ensure the power is set to high speed when cooking heavily.
  • S
    Sherry KingAug 3, 2025
    Why does the blower or fan seem weak in my Awoco SP-06?
    • P
      phillip56Aug 3, 2025
      A weak blower or fan in your Awoco Ventilation Hood could be due to a few reasons. First, verify that you're using the correct duct size: at least 6” for a 6" blower and 8” for an 8" blower, as the range hood won't function efficiently with insufficient duct size. Also, inspect the duct for any clogs and ensure the damper (half-circular flapper) is installed correctly and opens properly.
  • C
    Crystal PhelpsAug 9, 2025
    What to do if the Awoco SP-06 Blower Unit doesn't turn on?
    • R
      Ryan Klein MDAug 9, 2025
      If the blower unit of your Awoco Ventilation Hood isn't turning on, take these steps: First, check that all wires are correctly connected, referring to Step 1 for detailed connection instructions. Next, use a voltage meter to check if the blower unit is receiving power by measuring the neutral wire (black wire) and one of the speed wires. As a final check, directly connect the power cord to the blower to see if the motor has failed; refer to Step 1b for connection guidance.
  • W
    William ByrdAug 15, 2025
    How to fix buttons that don't work on my Awoco Ventilation Hood?
    • V
      Vickie LucasAug 16, 2025
      If the buttons on your Awoco Ventilation Hood aren't working, try these troubleshooting steps: * Make sure all wires are connected correctly, matching the colors on the wires. * Confirm that the Awoco Split Hood Unit or the Control Unit is properly plugged in. * Use a voltage meter to check if the Blower Unit has power by measuring the neutral wire (black wire) and one of the speed wires. * If the Awoco Split Hood Unit or the Control Unit isn't sending power to the Blower Unit, contact Awoco for circuit board and button panel replacements.
  • D
    David RodriguezAug 21, 2025
    What to do if the LED light is off on my Awoco SP-06 Ventilation Hood?
    • L
      Luke WalshAug 21, 2025
      If one LED light is off on your Awoco Ventilation Hood, contact Awoco for a LED bulb replacement. If both LED lights are off, there might be a circuit board failure on the 12V power supply; in this case, contact Awoco for circuit board and LED bulb replacements.

Summary

Important Safety Instructions

How to Test Run

Steps to Test Run Before Installation

Steps to follow for testing the unit before installation.

Test Run: Connect to Awoco Split Hood Unit or Control Unit

Test Run: Connect Directly to Power Cord

Test Run: Connect to Existing Range Hood Control Panel

Test Run: Power Cord Connection and Functionality Check

Installation

Installing the Blower Unit

Steps for mounting and connecting the blower unit.

Troubleshooting

Blower Unit Not Turning On

Possible causes and solutions when the blower unit is not turning on.

Control Unit Buttons Not Working

Troubleshooting for unresponsive control unit buttons.

LED Lights Off on Control Unit

Solutions for LED lights being off on the control unit.

Weak Blower or Fan Performance

Reasons for reduced blower or fan performance.

Improper Hood Venting

Awoco SP-06 Specifications

General IconGeneral
BrandAwoco
ModelSP-06
CategoryVentilation Hood
LanguageEnglish

Related product manuals