Awoco SP-06 - How to Test Run; Step 1 A. if the Awoco Split Hood Unit or the Control Unit Is Purchased; Step

5
How to Test Run
Steps to Test Run Before Installing
1. 1a. This Blower Unit works best with an Awoco Split Hood Unit or a Control Unit. (The Awoco Split Hood Unit or
the Control Unit must be purchased separately.)
• To connect the Blower Unit to an Awoco Split Hood Unit or a Control Unit, follow the diagram shown below to
connect the wires from the Blower Unit to the Awoco Split Hood Unit or the Control Unit:
Speed
3
Speed
2
Speed
1
Speed
Q
Neutral
Connecting the Blower Unit to an Awoco Split Hood Unit or a Control Unit
Speed
3
Speed
2
Speed
1
Speed
Q
Neutral