Installation Guide
& User Manual
Version: RH-UC085-201708
5” High Under Cabinet Range Hoods
Models: RH-UC085 (30”, 36”)
STOP and read! Test before installing
1. Please unpack the range hood and accessories carefully.
2. Remove the baffle filters, check any dent or damage inside and outside.
3. If found any loosing parts, please remove them.
4. Place the range hood on a flat stable surface, plug in 120V AC power
source. Press the power button and the speed buttons to turn on.
5. Check if any unusual metal touching noise, check the speed variation,
and press the Light button to check the lights.
6. Verify all functions per Section 9 RANGE HOOD OPERATIONS.
7. Refer to Section 10 TROUBLESHOOTING if any malfunction was found.
IMPORTANT:
Read and save these instructions.
NOTICE:
Installer: Leave this guide with the homeowner
Homeowner: Keep this guide for future reference
To Next Page
Need help?
General
