AXC HALO - Step 5: Attach Battery Straps

HALO – FVP Frame - Assembly Manual V1.1
Designs, Images and Content Copyright © Aeroxcraft Ltd. 2012 – 2016
Page 11
Step 5 – Attach Battery Straps
(1x) Velcro Strap
(2x) Washers
(1x) 100mm x Self-Adhesive Velcro (Hook)
(1x) 100mm x Self-Adhesive Velcro (Loop)
Cut the strap to suit your battery. The strap has holes in each end through
which you can screw to the Main Plate as in the photos below. Use the 2
washers on the screws.
Use the self-adhesive Velcro on the Main Plate and on your batteries for
additional security.