HALO – FVP Frame - Assembly Manual V1.1
Designs, Images and Content Copyright © Aeroxcraft Ltd. 2012 – 2016
Page 6
Introduction
This is a basic assembly manual for the construction of the AXC Halo. It does
not explain how to connect and setup the Flight controller, ESC, Motors, VTX,
RX etc.
We are working on more detailed assembly instruction that we will release
soon.
We recommend the following components for the AXC Halo:
Flight Controller: (1x) FuriousFPV PIKO BLX (20x20mm mounting
holes)
ESC: (2x) FuriousFPV SILKY 2in1 ESC BLHELI_S (20x20mm
mounting holes)
Props: (4x) FuriousFPV 1935
Motor: (4x) DYS BE1104 - 6500KV / RotorX RX1105B - 6500kv
Battery: (1x) 400-500mah 3S Lipo
RX: (1x) Furious Mini RX for Frsky
Camera/VTX: (1x) FX798T 5.8G 25mW 40CH Mini FPV Transmitter
Camera Combo
USB: For connecting the PIKO flight controller to your computer a
90deg USB lead will be very useful.
To Next Page
Loading...