S – 150 Controller User Manual
MKTF – 429-A 27 08/16
The Customer, at the Customer’s risk and expense, shall be responsible for returning such Product or component,
only after obtaining a Return Goods Authorization (RGA) number from the manufacturer, arranging for freight
prepaid, and in conformance with any special packaging and shipping instructions set forth on the operation
documentation or RGA instructions, or as otherwise reasonably required, to the manufacturer’s address set forth
below, together with (1) RGA number issued by the manufacturer at Customer’s request; (2) proof of purchase
and, if necessary, proof of installation date; (3) a Return Good Authorization Form; (4) a description of the
suspected defects; (5) the serial number of the manufacturer Product alleged to be defective; and (6) a description
of the type of water and pretreatment equipment which has been utilized in connection with the Product, if any.
The manufacturer shall, in the manufacturer’s reasonable discretion, be the sole judge of whether a returned
Product or component is defective in material or workmanship. Required or replaced Products or components
shall be returned surface freight. In genuine emergency situations, the manufacturer will (at the manufacturer’s
sole discretion) forward replacement parts to Customer without waiting for authorized return of the questionable
part(s). In such cases, Customer will issue a purchase order or other payment guarantee prior to shipment. If the
returned part is found to have been misused or abused, or the defective part is not received by the manufacturer
within thirty (30) days; the Customer will be invoiced for the replacement part(s) provided. This Warranty does not
cover or include labor and/or travel to the Customer’s premise or location or any other location. Charges of $1000
per day plus associated travel expenses will be incurred by the Customer in providing the Warranty Service at any
location other than the manufacturer’s main headquarters; that is if the manufacturer deems that the Product is
not covered by said Warranty. The manufacturer reserves the right to precondition such travel to Customer’s
premises upon prepayment of the manufacturer’s anticipated costs of attending such premises.
LIMITATIONS OF WARRANTY
OTHER THAN AS SPECIFICALLY SET FORTH IN THIS WARRANTY, THE MANUFACTURER MAKES NO
WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT, AND THE MANUFACTURER
DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.
THE MANUFACTURER’S LIABILITY UNDER THIS WARRANTY SHALL IN NO EVENT EXCEED THE
PURCHASE PRICE FOR THE PRODUCTS. THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS,
LOSS OF USE, COST OF REMOVING OR INSTALLING THE PRODUCT OR COMPONENTS, DOWNTIME, OR
THE CLAIMS OF THIRD PARTIES, AND INJURIES OR DAMAGES TO PERSONS OR PROPERTY.
INSTALLATION AND USE
The specifications and operational requirements for a Product are readily available from the manufacturer and
may be requested in writing via fax or email. Failure to request this information shall not void or invalidate this
Warranty or the limitations contained herein.
EXCLUSIVE WARRANTY
It is the intent of the parties to this contract to fully and completely state the rights and obligations of the parties in
this Warranty and the manufacturer has specifically set forth in this Warranty the extent and nature of the warranty
on the Product(s) to be sold. There are no warranties which extend beyond the description in this Warranty.
To Previous Page
Loading...