Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
22 2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
Assigning programmes to the modulators
In the cross multiplex mode, the tuners are no longer assigned to one modulator.
Click the table TUNER 1 to TUNER 4 on M1.
The programs are assigned to modulator 1.
Spliting the programmes of a transonder
If there are to much programms transmitted in one transponder, they can be splitted to several modulators.
For example: choose modulator M1 for two programmes and modulator M2 for two other programmes.
3.4.3. Select all programs
Activate the option Select all incoming programs, with each program of the tuner the modulator button
is activated.
Note: If the option is activated, then no settings can be made in the columns LCN, decrypt etc.
Programs,
which are
assigned to
modulator 2
The programms of
one transponder
are spitted to two
modulators
To Next Page
Loading...