2018-10-05 | Technical improvements, changes in design, printing- and other errors expected. 37
3.7.12. Channel list for all devices
You can create a common channel list for all devices with the same output modulation in the network.
Select the headends that shouled be included in the channel list.
Note: You can only select headends with the same output modulation.
Click on PRINT To PDF.
A PDF of the list is generated which you can open or save.
3.7.13. Network Information Table (NIT)
The NIT contains information about the signal configuration of a headend. A TV needs this information for a
fast channel search. The LCN (Logical Channel Numbering) is located within the NIT, which virtually allocates
the programs to a place.
The headend provides an auto NIT at the factory, which includes all channels from 114 MHz to 1002 MHz and
only the most important parameters such as symbol rate and modulation.
Operation with auto NIT supplies all channels from
114 MHz to 1002 MHz.
Operation leads to a conflict because of two NITs
with ON IDs and Network IDs.
To Next Page
Loading...