axing MK 8-0 Series - 3.7.3. Changing the IP address; Dynamic IP adress; Static IP adress

Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
32 2018-10-05 | Technical improvements, changes in design, printing- and other errors expected.
 Select a Modulation Standard.
 Click SAVE & REBOOT.
The changing of the modulation standard begins, the remaining time ist shown as a countdown.
The headend will be automatically rebooted, the enter password dialog will be displayed.
 Enter the password again.
 Check especially the modulator settings and their fill level.
3.7.3. Changing the IP address
The network options are configured under the menu item MAINTENANCE> SYSTEM OPTIONS.
Dynamic IP adress
 Use dynamic IP address to connect the device to a network with a DHCP server.
Static IP adress
 Use a static IP address to connect the device to a network with a fixed IP address. The IP address,
netmask and the gateway can be changed here. In addition, DNS server 1 and DNS server 2 can be
entered.