AXIS 2100 User’s Guide Using Your Camera with a Modem
15
2. Set up an existing session to 115 200bps, using the physical COM port to which you
have connected your AXIS 2100.
3. Log on with user ID root and password pass. The phone number you enter are
irrelevant at log on and you should thus use dummy numbers for completing these
dialogs.
4. Start your Dial-up Networking session and enter any URL: the AXIS 2100 emulates a
DNS server and will respond to this regardless.
5. Start the Installation Wizard and Administration Tools to further configure the product,
as described in Configuring Your Camera, on page 38.
To Next Page
Loading...
