AXIS 211W - System Options
35
Logs & Reports
When contacting Axis support, please be sure to
provide a valid Server Report with your query. The
Access Log is automatically included in the server
report.
Information
The Logs, Server Report and Parameter List provide
valuable information for troubleshooting and when
contacting Axis support.
•System Log - Provides information about system
events.
•Access Log - By default, the Access Log lists all failed
attempts to access the camera but can be configured to list all connections to the camera, whether successful or
not. Go to Support > Logs & Reports > Configuration and select the desired level of information from the list.
See Configuration below for more information.
The Access Log is useful for various purposes such as tracking all access to the camera, simple web attraction
tracking, system analysis and troubleshooting.
•Server Report - Provides information about the server status and should always be included when requesting
support.
•Parameter List - Shows the unit's parameters and their current settings.
•Connection List - Lists all clients that are currently accessing video and audio. It is also used for system analy-
sis and troubleshooting.
Configuration
From the drop-down lists, select the level of information to be added to the System Log and Access Log files and
the permitted size of the log files.
The default information level for the Access Log is set to Critical & Warnings, i.e. failed connections. However,
in an error situation and when requesting support, set it to the highest information level - Critical & Warnings &
Info.
For the Log Level for Email, select from the drop-down list the level of information to send as email and enter
the destination email address.
Advanced
Scripting is an advanced function that provides the means for customizing and using scripts.
Caution!
The scripting function is a very powerful tool. Improper use may cause unexpected behavior or even loss of
contact with the unit. If a script does cause problems, reset the unit to its factory default settings (in which case,
a previously saved backup file will be useful for returning the unit to its latest configuration). Axis strongly
recommends that you do not use this function unless you fully understand the consequences. Axis support
provides no assistance for customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config - this function is for the advanced user with previous experience of configuring Axis cameras. All
parameters can be set and modified from this page. Help is available via the links on the standard setup pages.
To Next Page
Loading...
Need help?
General
