Axis 233D User Manual (English)

Other manuals for Axis 233D

User Manual81 pages

Installation Guide104 pages

Datasheet2 pages

Questions and Answers:

A
Amy HarringtonAug 18, 2025
Why is my Axis Security Camera accessible locally but not externally?
- D
  David MartinezAug 18, 2025
  Your Axis Security Camera may be accessible locally but not externally due to several reasons: a firewall might be blocking the connection, the default router settings may need configuration, or the internet site might be overloaded. Check the Internet firewall with your system administrator and see if you need to configure the default router settings. If the Internet site is too heavily loaded, use a script running on your web server to relay images from the AXIS 233D to the Internet.
P
Philip WebsterAug 20, 2025
What to do if I have problems setting the IP address for my Axis 233D Security Camera?
- C
  Charles DiazAug 21, 2025
  If you're having trouble setting the IP address for your Axis Security Camera, keep in mind: the IP address must be set within two minutes after powering on the device, so restart the camera and try again, ensuring the ping length is set to 408. If that doesn't work, it's possible the camera is on a different subnet; contact your network administrator for an IP address on the same subnet as your computer. Alternatively, the IP address might already be in use by another device, in which case you'll need to obtain a new IP address and reinstall the unit. Using ARP Ping.
A
Amy FordAug 23, 2025
Why can't I access my Axis 233D from a web browser?
- A
  antoniothompsonAug 23, 2025
  If you cannot access your Axis Security Camera from a web browser, it might be because the IP address has been changed by DHCP, or there are other networking problems. To solve the IP address issue: 1. Move the camera to an isolated network or one without a DHCP or BOOTP server and set the IP address again using AXIS IP Utility or the ARP Ping command. 2. Access the unit and disable BOOTP and DHCP in the TCP/IP settings, then return the unit to the main network. To check for other networking problems, test the network cable by connecting it to another network device, then Ping that device from your workstation.
C
Craig ObrienAug 26, 2025
How to fix Axis 233D when the status indicator flashes red?
- L
  Lauren SteinAug 26, 2025
  If the status indicator on your Axis Security Camera is flashing red, it means a firmware upgrade was interrupted or the firmware is damaged. First, set the IP address using AXIS IP utility or ARP and Ping. Then, from a web browser, access the unit and upgrade to the latest firmware.
J
James TuckerAug 28, 2025
Why I cannot send notifications, uploads, alarms, etc, to a destination outside the local network from my Axis 233D?
- A
  Anthony HarrisAug 28, 2025
  If your Axis Security Camera cannot send notifications, uploads, alarms, etc., to a destination outside the local network, this could be due to firewall protection. The camera can be configured to use a SOCKS server to reach networks on the other side of a firewall/proxy server.
D
Debra RayAug 30, 2025
How to resolve bad snapshot images on my Axis 233D Security Camera?
- J
  Julie KingAug 30, 2025
  If you're getting bad snapshot images from your Axis Security Camera, the display on your workstation might be incorrectly configured. In Display Properties, configure your display to show at least 65536 colors, meaning at least 16-bit.
N
nfletcherSep 2, 2025
What causes unexpected PTZ behavior in my Axis 233D Security Camera?
- R
  Roy AndersonSep 2, 2025
  Unexpected PTZ behavior in your Axis Security Camera may be due to hardware issues. Go to System Options > Maintenance > Dome Status and click Test to test the camera and dome mechanics for errors.
J
Jordan MarquezSep 4, 2025
What causes problems with the MPEG-4 format on my Axis 233D?
- B
  Brad TorresSep 4, 2025
  If you're experiencing problems with the MPEG-4 format on your Axis Security Camera, such as a lower frame rate than expected, check with the administrator that there is enough bandwidth available and review the settings for bit rate control. If no MPEG-4 is displayed in the client, check that the correct network interface is selected in the AMC control panel applet.
K
Katie ChambersSep 7, 2025
How to solve problems setting the IP address of Axis 233D Security Camera?
- G
  grace59Sep 7, 2025
  If you are having problems setting the IP address for your Axis 233D Security Camera, it may be caused by several factors. The IP address must be set within two minutes after power is applied; restart the server and try again, ensuring the ping length is set to 408 using ARP Ping. If the AXIS 233D is on a different subnet, contact your network administrator for an IP address on the same subnet as the computer you are performing the installation from. If the IP address is already in use, disconnect the power from the AXIS 233D and run the Ping command. If you receive a reply, the IP address is in use; obtain a new one and reinstall the unit. If you receive a 'Request timed out' message, the IP address is available, so check all cabling and reinstall the unit.

Axis 233D Specifications

General

Model	Axis 233D
Image Sensor Type	CCD
Lens Type	Varifocal
Day/Night	Yes
Audio Support	Two-way audio
Ethernet	Yes
Resolution	640x480
Optical Zoom	18x
Digital Zoom	12x
Lens	Vari-focal
Minimum Illumination	0.7 lux
Compression	Motion JPEG, MPEG-4
Network Interface	10/100Base-T
Power over Ethernet	Yes
Power Supply	12 V DC
Operating Temperature	-10 to 50 °C
Features	Privacy Masking
Shutter Speed	1/50 - 1/10000 s