Axis ATS210 - Drying Profiles

22 USER MANUAL
13.4 Drying profiles
Drying profile will be used to optimization of drying process by accommodation a process
to physical properties of sample material. Oxidized materials or thickening on the surface
need slow or step profile. Resistant materials can use fast profile . The choice of profile
and his parameters should be a result of experience with examinated material.
After choosing a profile set proper
parameters for example t1 and T1.
Attention: Final drying temperature
is inscribed only in Standard profile or
in Drying setting (main menu).
DRYING PROFILE
Drying profile : <standard>
T=120C T
Exit
120C
t
DRYING PROFILE
Drying profile : <slow>
t1=100s T
Exit
120C
t1
t
DRYING PROFILE
Drying profile : <step>
t1=100s T
T1=60C
t2=100s 120C
T2=90C
Exit t1
t2
t
DRYING PROFILE
Drying profile : <fast>
t1=100s T1
T1=140C T
Exit 140C
t1
t
DRYING SETTINGS
1. Drying temperature : 120C
2. Mode : short mode
3. Calculation : m0-m/m0*100%
4. Samples quantity : 2 samples
5. Sampling : 10s
6. Drying time : 0:00:10s
7. Drying profile : standard
8. Settings storing : 1
Exit