Axis AX1522 - Simple Troubleshooting

Simple Troubleshooting
If the display fails or performance dramatically deteriorates the followingKLQWVPD\DVVLVW.
Remember to check the peripherals topinpoLnt the source of the failure.
If the display still fails to perform as expected,FRQWDFW your GHDOHU for assistance.
No power
- Check all connections to the TV.
- Press either the power button or the Standby button on the Remote control.
No picture or sound
- Ensure that theTV is plugged in and the power is on.
- Ensure that the aerial is connected.
-Try a different program.
Poor picture quality
- Check the aerial connections.
- Check that the channel is tuned in properly.
-Adjust the picture settings:brightness,colour,sharpness,contrast,hue.
- Make sure that theTV is not located close to electrical appliances that emit radio
frequency interference.
No colour
-Adjust the colour setting.
- Check that the programme is broadcast in colour.
- Check that the cKannel is tuned properly.
TV does not respond to remote control
- Check that there are no obstructions between the remote control and the unit.
- Check that the remote control is within range of the unit.
- Check that the batteries in the remote control and not weak or IODW.
