10
USER MANUAL
_____________________________________________________________________________________________________________________
After discharge signalising appears an accumulator should be charged as quickly as
possible by connecting external feeder. Charging is more effective when scale is
turned off with I/ key, then charging time is about 10 hours.
It is also possible to connect accumulator directly to PA6V charger leaving
accumulator in a scale or take it out if needed. In order to take accumulator out
take off a pan, disconnect accumulator wire and unscrew mounting screws.
Charging an accumulator through scale feeder:
230V
feeder
scale
Charging an accumulator directly through charger:
230V charger
feeder
scale
To Next Page
Loading...
Need help?
General
