Axis B Series - Printer Cooperation Settings (F

18 USER MANUAL
_____________________________________________________________________________________________________________________
19. Printer cooperation settings (F..-LPt)
Activate the function for automatic
serial port working mode
(cooperation with a printer).
After activation the scale prints
a header. Weighing result with
a successive measurement number is
printed automatically after result
stabilisation (without using key).
To select computer cooperation mode
( key activated and weighing
results without successive numbers)
press MENU key, then with → T ←
key chose F..-LPt and F..-0.
0.00
F.. -LPt
F.. -1
F.. -0
0.00
T
T