Axis I8016-LVE - Use DTMF to Unlock the Door for a Visitor

AXISI8016-LVENetworkVideoIntercom
Additionalsettings
3.ClickSave.
UseDTMFtounlockthedoorforavisitor
Whenavisitormakesacallfromtheintercom,thepersonwhoanswerscanusetheDual-ToneMulti-Frequencysignaling(DTMF)
ofhisSIPdevicetounlockthedoor.Thedoorcontrollerunlocksandlocksthedoor.
Thisexampleexplainshowto:
•denetheDTMFsignalintheintercom
•setuptheintercomto:
-requestthedoorcontrollertounlockthedoor,or
-unlockthedoorusingtheinternalrelay.
Youmakeallsettingsintheintercom’swebpage.
Beforeyoustart
•AllowSIPcallsfromthedeviceandsetupaSIPaccount.SeeSetupdirectSIP(P2P)andSetupSIPthroughaserver(PBX).
DenetheDTMFsignalintheintercom
1.GotoVoIP>DTMF.
2.ClickthepencilnexttotheSIPaccount.
3.ClickAdd.
4.IntheNameeld,enter"Unlockdoor".
5.IntheSequenceeld,enter"1".
6.ClickApplyandthenOK.
Setuptheintercomtorequestthedoorcontrollertounlockthedoor
1.GotoEvents>Management>ActionrulesandclickAdd.
2.IntheNameeld,enter"DTMFunlockdoor".
3.Fromthelistoftriggers,selectCall,DTMFandUnlockdoor.
4.Fromthelistofactions,selectAxisDoorControl.
5.ClickNewRecipient.
6.EnterthedetailsforthedoorcontrollerandclickOK.
7.ClickRetrievedoorsandselectthedoorfromthelist.
8.UnderDooractions,selectAccessDoor.
9.ClickOK.
Setuptheintercomtounlockthedoorusingtheinternalrelay
1.FollowthestepsunderDenetheDTMFsignalintheintercom
2.GotoEvents>Management>ActionrulesandclickAdd.
3.IntheNameeld,enter"DTMFunlockdoor".
10