Axis M1034-W User Manual

AXISM1034-WNetworkCamera
ConfiguretheLiveViewPage
•SelectEnablerecordingbuttontoenablerecordingfromtheLiveViewpage.Thisbuttonisavailablewhenusingthe
AMCviewer.TherecordingsaresavedtothelocationspeciedintheAMCControlPanel.SeeAXISMediaControl
(AMC)onpage16.
UserDenedLinks
Todisplayuser-denedlinksintheLiveViewpage,selecttheShowcustomlinkoption,givethelinkanameandthenentertheURL
tolinkto.Whendeningaweblinkdonotremovethe'http://'fromtheURLaddress.Customlinkscanbeusedtorunscriptsor
activateexternaldevicesconnectedtotheproduct,ortheycanlinktoawebpage.Customlinksdenedascgilinkswillrunthe
scriptinthebackground,inahiddenframe.Deningthelinkasaweblinkwillopenthelinkinanewwindow.
LightButtons
Thebuilt-inlightontheAXISproductcanbecontrolleddirectlyfromtheLiveViewpagebyenablingthedisplayoflightbuttons.
TodisplaythelightbuttonsintheLiveviewPage,selectthetypeofcontrolfromthedrop-downlistunderLiveViewCong>
LightButtons:
•Pulseactivatesthelightforadenedperiodoftime.Thepulsetimecanbesetasshortas1/100second,andaslongas
60seconds
•Active/Inactivedisplaystwobuttons(on/off).
•Slidercontrolsthebrightnessofthebuilt-inlight,slidelefttodimandsliderightdotobrighten.
OutputButtons
ExternalI/OdevicesconnectedtotheAxisproduct’soutputportscanbecontrolleddirectlyfromtheLiveViewpage.
TodisplayoutputbuttonsintheLiveViewpage:
1.GotoSetup>LiveViewCong.
2.UnderOutputButtons,selectthetypeofcontroltouse:
-Pulseactivatestheoutputforadenedperiodoftime.Thepulsetimecanbesetfrom1/100secondto60
seconds.
-Active/Inactivedisplaystwobuttons,oneoreachaction.
Toconguretheactiveandinactivestates,gotoSystemOptions>Ports&Devices>I/OPortsandsettheport’sNormalstate.
FormoreinformationaboutI/Oports,seeI/OPortsonpage54.
27

Axis M1034-W Specifications

General

Brand	Axis
Model	M1034-W
Category	Security Camera
Language	English