Need help?Do you have a question about the Axis M2025-LE and is the answer not in the manual?
General| Form factor | Bullet |
|---|---|
| Mounting type | Ceiling/wall |
| Product color | Black |
| Housing material | Polymer |
| International Protection (IP) code | IP66 |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/2.8 \ |
| Lens mount interface | M12 |
| Fixed focal length | 2.8 mm |
| Maximum aperture number | 2 |
| Angle of rotation | 270 ° |
| Camera shutter speed | 1/65000 - 2 s |
| Minimum illumination | 0.04 lx |
| Type | IP security camera |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264, M-JPEG, MPEG4 |
| Image quality adjustment | Brightness, Contrast, Sharpness |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Security algorithms | HTTPS, SNMP, SSH, SSL/TLS |
| Alert notification type | |
| Wi-Fi | No |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| Minimum RAM | 512 MB |
| Power source type | PoE |
| Power consumption (max) | 6.3 W |
| Power consumption (Power over Ethernet (PoE)) | 4.1 W |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 15 m |
| Built-in HDD | - |
| Compatible memory cards | SD, SDHC, SDXC |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -30 - 50 °C |
| Operating relative humidity (H-H) | 10 - 100 % |
| Interface | RJ-45 |
| Number of cameras | 1 |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Weight | 500 g |
|---|---|
| Diameter | 101 mm |
Instructions for setting a strong password for the root user to secure the device.
Choosing exposure modes like Automatic, Flicker-free, Flicker-reduced, and Hold current.
Configuring night mode for low-light conditions and using IR illumination for brighter images.
Selecting between Motion JPEG and H.264 for video streaming based on network requirements.
Setting up rules to automatically record video before and after motion detection events.
Procedures for resetting the device to its original factory settings, including button presses and web interface methods.
To Next Page
