Page 12 AXIS Q1602/Q1604 Network Camera Installation Guide
5. Enter the password as set above, and click OK. If the password is lost, the camera must be reset
to the factory default settings. See page 19.
6. AXIS Q1604: The capture mode must be set the first
time AXIS Q1604 is accessed. Select the desired
capture mode from the drop-down list and click OK.
Note:
The capture mode can be changed later from the prod-
uct’s web pages, but this will reset most other settings.
For more information, see the online help or User’s
Manual.
7. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video
stream in Internet Explorer. You will need administrator rights on the computer to do this.
Note:
To install AMC in Windows Vista, you must run Internet Explorer as administrator. Right-click the
Internet Explorer icon and select Run as administrator.
8. The Live View page of the network camera is displayed; the Setup link leads to menus that
allow you to customize the camera.
Setup – Provides all the tools
for configuring the camera to
requirements.
Help – Displays online help
on all aspects of using the
camera.
To Next Page
Loading...
Need help?
General
