Need help?Do you have a question about the Axis Q1786-LE and is the answer not in the manual?
General| Sensor type | CMOS |
|---|---|
| Progressive scan | Yes |
| Number of sensors | 1 |
| Optical sensor size | 1/1.8 \ |
| Optical zoom | 32 x |
| Focal length range | 4.3 - 137 mm |
| Maximum aperture number | 4 |
| Minimum aperture number | 1.4 |
| Camera shutter speed | 1/100000 - 2 s |
| Minimum illumination | 0.04 lx |
| Type | IP security camera |
| PTZ modes | Digital PTZ |
| Certification | EN 55032 Class A, EN 50121-4, IEC 62236-4, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, RCM AS/NZS CISPR 32 Class A, KCC KN32 Class A, KN35, EAC, IEC/EN/UL 62368-1, IEC/EN/UL 60950-22, EN 50581, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-27, IEC 60068-2-78, IEC/EN 60529 IP66, IP67, IEC/EN 62262 IK10 body, IK08 glass, NEMA 250 Type 4X, EN/IEC 62471 |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Bit rate control | Variable Bit Rate (VBR) |
| Total megapixels | 4 MP |
| Maximum resolution | 2560 x 1440 pixels |
| Image quality adjustment | Brightness, Mirror, Saturation, Sharpness |
| Video compression formats | AVC, H.264, M-JPEG, MPEG4 |
| Wi-Fi | - |
| Streaming method | Multicast |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, LLDP |
| IK code | IK10 |
| Form factor | Bullet |
| Product color | Black, White |
| Housing material | Aluminum |
| Protection features | Shock resistant |
| International Protection (IP) code | IP66, IP67 |
| Sample rate | 48 kHz |
| Audio formats supported | ADPCM, G.711, LC-AAC, OPUS, PCM |
| Alert notification type | |
| Flash memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| AC input voltage | 20 - 24 V |
| Power source type | AC, DC, PoE |
| Power consumption (max) | 13.8 W |
| Power consumption (typical) | 8.6 W |
| Cables included | LAN (RJ-45) |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 80 m |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | -40 - 60 °C |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Length | 386 mm |
|---|---|
| Weight | 2400 g |
| Diameter | 147 mm |
Accessing the device via a web browser, including IP address or hostname.
Guidelines and best practices for creating and managing secure passwords for device access.
Steps to set a strong, secure password for the root user account.
Visual guide to the camera's web interface, highlighting key controls and elements.
How to access and use the embedded help system for detailed information.
Information on using fiber-optic cables for extended network connectivity.
Adjusting settings to optimize image clarity, including capture modes and exposure.
Explains the different focus modes (Auto, Area, Manual) and how to adjust focus.
Configuring night mode and IR illumination for optimal low-light performance.
Techniques for minimizing image noise in dimly lit environments.
Settings to enhance image detail, potentially affecting bitrate and frame rate.
Using Wide Dynamic Range (WDR) to improve visibility in high-contrast lighting.
Enabling EIS to reduce blur caused by vibrations and movement.
Correcting image distortion caused by wide-angle lenses.
Using corridor format for optimized viewing in elongated spaces.
Optimizing image settings for accurate license plate identification.
Using AXIS Traffic Wizard for improved traffic monitoring image quality.
Adding visual information or text to the video stream.
Configuring camera movement limits, guard tours, and autotracking features.
Managing video compression, bandwidth, and recording storage options.
Understanding the interaction between different video stream and image settings.
Procedures for starting, stopping, and viewing recorded video footage.
Configuring actions based on detected events like motion or impact.
Configuring motion detection to automatically start video recording.
Connecting and configuring a PIR sensor to trigger video recording.
Using gatekeeper functionality for automatic zoom on specific events.
Setting up shock detection to record video upon impact or tampering.
Information about the AXIS Camera Application Platform (ACAP) for third-party software.
Procedure to restore the device to its original factory settings.
Steps to verify the installed firmware version on the device.
Instructions for updating the device's firmware to the latest version.
Common issues and solutions related to firmware upgrade failures.
Troubleshooting steps for issues arising after a firmware update.
Solutions for difficulties in configuring or assigning an IP address.
Diagnosing and resolving issues preventing browser access to the device.
How to locate the device if its IP address changes dynamically.
Troubleshooting external access issues related to router and firewall configurations.
Explanation of the status LED lights and their meanings.
Information about the buzzer's function as a leveling assistant.
Details regarding the microSD card slot and its usage precautions.
Specific functions of the control button, including reset and system connection.
Details on the function button's role in leveling and operation.
Information about the RJ45 Ethernet connector and Power over Ethernet (PoE).
Details on using the insulation-displacement connector for network connections.
Specifications and pinout for the 3.5 mm audio input connector.
Information on the 4-pin terminal block for connecting external devices.
Details about the 2-pin terminal block for DC power input.
To Next Page
