Need help?Do you have a question about the Axis ExCam XF Q1785 and is the answer not in the manual?
General| Resolution | 1920x1080 to 320x180 |
|---|---|
| Audio | Two-way audio |
| Operating Conditions | -60 °C to 60 °C (-76 °F to 140 °F) |
| Video Compression | H.264, H.265, MJPEG |
| Ingress Protection | IP66 |
| Audio Compression | AAC, G.711, G.726 |
| Audio Input | External microphone input |
| Audio Output | Line output |
| Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X, Digest authentication, User access log |
| System Integration | ONVIF Profile S |
| Casing | Stainless steel |
| Power | Power over Ethernet (PoE) IEEE 802.3af/802.3at |
| Connectors | RJ45 10BASE-T/100BASE-TX |
| Edge Storage | microSD/microSDHC/microSDXC |
| Image Sensor | 1/2.8” progressive scan RGB CMOS |
Steps to find, access, and log into the device via its web interface.
Creating an admin account, securing passwords, and verifying firmware integrity.
Configures capture mode, power line, orientation, image level, and focus.
Manages scene profiles, exposure modes, and IR illumination for optimal image quality.
Reduces noise, motion blur, and maximizes image details for clarity.
Configures video recording, bandwidth reduction, and network storage.
Creates rules for event-triggered actions and motion/impact recording.
Adjusting image appearance, scene profiles, and white balance settings.
Performing device maintenance tasks and managing firmware upgrades.
Steps for resetting the device to its original factory default settings.
Instructions for upgrading device firmware and managing firmware options.
Resolving problems with IP address configuration and browser access.
To Next Page
