Need help?Do you have a question about the Axis Q6100-E and is the answer not in the manual?
General| Form Factor | Dome |
|---|---|
| Outdoor Ready | Yes |
| Day/Night Functionality | Yes |
| Power over Ethernet | Yes |
| WDR | Yes |
| IP Rating | IP66 |
| IK Rating | IK10 |
| Sensor Type | 1/2.8" Progressive scan CMOS |
| Minimum Illumination | 0.3 lux |
| Compression | H.264, MJPEG |
| Network Interface | RJ45 10BASE-T/100BASE-TX |
| Power Consumption | Max 25 W |
Instructions for locating the device on the network using AXIS IP Utility or AXIS Device Manager.
Lists supported web browsers for accessing the device.
Steps to access the device via a web browser, including login credentials.
Guide to setting a secure password for the root account.
Recommendations for creating strong, secure passwords for the device.
Explains the main elements of the device's web interface with numbered callouts.
Identifies the settings tabs available in the device's interface.
Overview of image adjustment settings and a link to more details.
Step-by-step instructions for replacing the camera lens.
Guide on how to adjust the camera's focus using autofocus area.
Explains different exposure modes for optimizing image quality in various lighting.
How to use night mode for better low-light image quality.
Settings to minimize noise in low-light images.
Settings to reduce motion blur in low-light environments.
Explanation of Wide Dynamic Range (WDR) for handling high contrast scenes.
How to create privacy masks to obscure parts of the video stream.
Points to "Streaming and storage" for viewing/recording details.
Tips for reducing bandwidth and storage usage.
Steps to configure network storage for recordings.
Instructions for recording and playing back video.
How to create rules for triggering actions based on events.
Explains how to set up rules to trigger specific actions.
Example of setting up recordings triggered by motion detection.
How to display text overlays on video when motion is detected.
Setting up email alerts for lens tampering (dark images).
Instructions for cleaning the device safely and effectively.
Detailed explanation of privacy masks and their usage.
Information on video compression formats and streaming.
Explains H.264 and H.265 compression formats.
Clarifies the relationship between different stream settings.
Explanation of managing bandwidth consumption for video streams.
Describes VBR for managing bandwidth based on scene activity.
Setting a target bitrate to manage limitations and prioritize quality/frame rate.
Adjusting bitrate over time to meet targets and optimize storage.
Steps to reset the device to its original factory settings.
Information on Axis firmware tracks (active vs. LTS).
How to check the installed firmware version.
Important notes and steps for upgrading the device firmware.
General troubleshooting section for technical problems.
Addresses potential issues during firmware upgrades.
Solutions for IP address configuration problems.
Troubleshooting steps for when the device is not accessible via browser.
Guidance on accessing the device remotely.
Common issues related to video streaming and their solutions.
Troubleshooting steps for PTZ control issues.
Factors affecting system performance, bandwidth, and frame rate.
Information on how to contact Axis support for assistance.
Diagram and labels for physical components of the product.
Table explaining the status and meaning of LED indicators.
Information about the SD card slot, compatibility, and usage precautions.
Details on the function of the control and restart buttons.
Description of the network connector and its specifications.
To Next Page
