Need help?Do you have a question about the Axis Q6315-LE and is the answer not in the manual?
General| Pan Range | 360° endless |
|---|---|
| Day/Night Functionality | Yes |
| IK Rating | IK10 |
| Resolution | 1920x1080 |
| Optical Zoom | 31x |
| Infrared Illumination | Up to 250 meters |
| Power over Ethernet (PoE) | Yes |
| Weather Resistance | IP66, NEMA 4X |
| Image Sensor | 1/2.8" progressive scan CMOS |
| Video Compression | H.264, H.265, MJPEG |
| Frame Rate | Up to 60 fps |
| Audio Compression | AAC, G.711, G.726 |
| Audio Input/Output | 1 input, 1 output |
| Network Protocols | IPv4, IPv6, HTTP, HTTPS, FTP, SMTP |
| Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication, user access log |
| Edge Storage | microSD/microSDHC/microSDXC slot |
| Operating Conditions | -40°C to 50°C (-40°F to 122°F) |
| Power | Max 25.5 W |
| ONVIF | Profile S, G, T |
Locate the device on the network and access its web interface for initial setup.
Instructions on setting strong passwords and securing the root account to protect the device.
Ensure device firmware integrity and get an overview of the device's web interface features.
Configure image settings, night mode, exposure, WDR, and noise reduction for optimal video.
Manage pan, tilt, zoom, set limits, and create guard tours for camera movement.
Set up network storage, manage video recording, and configure streaming parameters.
Create rules and triggers for automated device actions based on events like motion detection.
Set up object detection recording and motion-based preset positioning for automated responses.
Understand the device interface layout, menus, and view system status and device information.
Configure video stream settings, focus, brightness, sharpness, and image correction options.
Configure PTZ limits, motion speed, and advanced movement features like auto-flip.
Manage network settings, security protocols, user accounts, certificates, and access control.
Configure storage, set up event rules, manage recordings, and perform firmware updates.
Step-by-step guide on how to reset the device to its original factory settings.
Solutions for firmware upgrade failures, access problems, and IP address conflicts.
Resolve issues with video streaming, rendering, and optimize system performance.
Information on how to get help from Axis technical support for unresolved issues.
To Next Page
