Do you have a question about the Axis Q6128-E and is the answer not in the manual?
Type | IP security camera |
---|---|
PTZ control | Yes |
Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
Number of languages | 11 |
Placement supported | Indoor & outdoor |
Connectivity technology | Wired |
Form factor | Spherical |
Mounting type | Ceiling |
Product color | Black, White |
Housing material | Aluminum |
Protection features | Dust resistant, Freeze resistant, Snow resistant, UV resistant, Water resistant |
International Protection (IP) code | IP66 |
Total megapixels | 8 MP |
Maximum resolution | 3840 x 2160 pixels |
Supported video modes | 1080p |
Video formats supported | H.264, M-JPEG |
Video compression formats | AVC, H.264, M-JPEG, MPEG4 |
Optical zoom | 12 x |
Number of lenses | 1 |
Focal length range | 3.9 - 46.8 mm |
Maximum aperture number | 1.8 |
Minimum aperture number | 2 |
Pan speed | 700 °/sec |
Tilt angle range | 20 - 90 ° |
Camera shutter type | Electronic |
Camera shutter speed | 1/1000 - 1 s |
Minimum illumination | 0.03 lx |
Sensor type | CMOS |
Optical sensor size | 1/2.3 \ |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | -20 - 50 °C |
Operating relative humidity (H-H) | 10 - 100 % |
Flash memory | 256 MB |
HDD capacity | 1 GB |
Compatible memory cards | SD, SDHC, SDXC |
Interface | RJ-45 |
AC input voltage | 100 - 240 V |
Power source type | AC |
Power consumption (max) | 25 W |
Power consumption (typical) | 14 W |
Wi-Fi | No |
Cabling technology | 10/100/1000Base-T(X) |
Ethernet interface type | 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet |
Supported network protocols | IPv4/v6, HTTP, HTTPS a , SSL/TLS a , QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP TM , SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SRTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH, NTCIP |
Harmonized System (HS) code | 85258900 |
Depth | 165 mm |
---|---|
Width | 256 mm |
Weight | 3000 g |
Width (with stand) | 274 mm |
Details about physical connectors and buttons on the camera.
Information on the RJ45 connector for network and power.
Instructions for accessing the product via a web browser.
How to access the product remotely over the internet.
Guide to streaming video using the H.264 codec.
Details about the AXIS Media Control viewer for streaming.
Initial configuration steps for the Axis product.
Default image settings like resolution, compression, and frame rate.
Settings for selecting default video viewers for different browsers.
Options to configure viewer behavior and toolbar display.
Saving and accessing specific camera views.
Enables the camera to automatically follow moving objects.
Displays video from different preset positions sequentially.
Manages PTZ control access among multiple users.
Detects movement in the camera view to trigger alarms.
Configures areas for motion detection.
Steps to upload and install third-party applications.
Defines conditions and actions for event triggering.
Lists available actions that can be performed upon event triggers.
Defines users or systems to receive event notifications.
Instructions for searching and locating stored recordings.
Configuration for uninterrupted video recording.
Manages user access, passwords, and network security configurations.
Configuration for IP settings, DHCP, static IP, and network protocols.
Management of SD card and network storage for recordings.
Restores all settings to original factory defaults.
Steps to update the product's firmware to the latest version.
Troubleshooting common issues and their solutions.
Details about the image sensor, lens, and autofocus.
Specifications for video compression, resolution, and frame rate.
Specifications related to security and network protocols.