Need help?Do you have a question about the Axis Q6225-LE and is the answer not in the manual?
General| Model | Axis Q6225-LE |
|---|---|
| Type | PTZ Network Camera |
| Image Sensor | Progressive scan CMOS |
| Resolution | 1920x1080 (1080p) |
| Pan/Tilt | Pan: 360° |
| Video compression | H.264, H.265, Motion JPEG |
| Audio compression | G.711, G.726 |
| Audio input/output | 1 input, 1 output |
| Security | Password protection, IP address filtering |
| Network protocols | IPv4, IPv6, HTTPS, RTSP, RTP |
| Network Interface | 10/100/1000 Ethernet |
| Edge storage | MicroSD/SDHC/SDXC card slot |
| Casing | IP66, IK10 |
Covers finding the device on the network, accessing the web interface, and setting initial security.
Describes the main elements of the device's web interface.
Configures essential device settings like capture mode, power line frequency, and image adjustments.
Details focus recall areas, scene profiles, exposure modes, and IR illumination for optimized image quality.
Explains how to correct barrel distortion and verify pixel resolution for specific tasks.
Covers managing privacy masks and adding custom overlays (text/image) to the video stream.
Manages PTZ movement limits and sets up automated guard tours for surveillance.
Guides on setting up recorded tours, reducing bandwidth, and configuring network storage for video.
Defines rules to automate actions based on events like motion or impact detection.
Configures automatic zoom (gatekeeper) and object tracking features for enhanced surveillance.
Explains how to navigate the interface, check device status, and manage basic information.
Details controls for PTZ movement, focus, brightness, and other video stream adjustments.
Covers camera installation settings like capture mode, mounting position, and power line frequency.
Details image appearance settings, including distortion correction, stabilization, and straightening.
Covers scene profiles, saturation, contrast, brightness, sharpness, WDR, and white balance adjustments.
Manages IR illumination, exposure modes, and stream settings like resolution, compression, and bitrate.
Configures visual overlays, privacy masks, and saves specific PTZ positions for quick access.
Sets PTZ movement limits, adjusts motion speed, and configures system network and protocol settings.
Manages security certificates, user accounts, network protocols, and event rules for device operation.
Configures network storage, communication protocols (HTTP, MQTT), and system maintenance tasks.
Covers restarting the device, restoring settings, and upgrading firmware for optimal performance and security.
Explains capture modes and the functionality of remote focus and zoom adjustments.
Details video compression formats, stream settings, and bitrate control for efficient video streaming.
Introduces AXIS Camera Application Platform (ACAP) and specific analytic applications like People Counter.
Provides an overview of the device's cybersecurity features, including Edge Vault, signed firmware, and secure boot.
Details the physical components, status LEDs, and SD card slot of the camera.
Describes the network connector and the function of the control button for device management.
Provides guidelines for cleaning and maintaining the camera's exterior.
Covers resetting the device to factory defaults and managing firmware versions for optimal operation.
Addresses common problems like firmware upgrade failures and IP address configuration issues.
Explains how system setup and various settings can impact device performance and video stream quality.
To Next Page
