Axis Q6100-E - Additional settings; Adjust the image; Replace the lens; Adjust the focus

AXISQ6100-ENetworkCamera
Additionalsettings
Additionalsettings
Adjusttheimage
Ifyouwanttoknowmoreaboutdifferentimagesettings,seeLearnmoreonpage13.
Replacethelens
1.Stopallrecordingsanddisconnectpowerfromtheproduct.
2.Removethelens.
3.Attachthenewlens.
4.Reconnectthepower.
5.Logintotheproduct’swebpage,gotoSettings>System>Orientation>CameraX>Lensselectionandselectthe
newlens.
6.Adjustthefocus.
7.Doapositioningcalibrationofthecamera.
Adjustthefocus
Toadjustthefocus:
1.GotoSettings>Image>FocusandclickShowAFarea.
2.Adjusttheautofocusareatocoverthepartoftheimagethatyouwanttobeinfocus.
Ifyoudon’tselectanautofocusarea,thecamerafocusesontheentirescene.Werecommendthatyoufocusona
staticobject.
3.ClickAutofocus.
Selectexposuremode
Therearedifferentexposuremodeoptionsinthecamerathatadjustsaperture,shutterspeed,andgaintoimproveimagequalityfor
specicsurveillancescenes.GotoSettings>Image>Exposureandselectbetweenthefollowingexposuremodes:
•Formostusecases,selectAutomaticexposure.
•Forenvironmentswithcertainarticiallighting,forexampleuorescentlighting,selectFlicker-free.
Selectthesamefrequencyasthepowerlinefrequency.
•Forenvironmentswithcertainarticiallightandbrightlight,forexampleoutdoorswithuorescentlightingatnightand
sunduringdaytime,selectFlicker-reduced.
Selectthesamefrequencyasthepowerlinefrequency.
•Tolockthecurrentexposuresettings,selectHoldcurrent.
BenetfromIRlightinlow-lightconditionsusingnightmode
Yourcamerausesvisiblelighttodelivercolorimagesduringtheday.Astheavailablelightdiminishes,youcansetthecamerato
automaticallyshifttonightmode,inwhichthecamerausesbothvisiblelightandnear-infraredlighttodeliverblack-and-white
images.Sincethecamerausesmoreoftheavailablelightitcandeliverbrighter,moredetailed,images.
1.GotoSettings>Image>Dayandnight,andmakesurethattheIRcutlterissettoAuto.
6