Need help?Do you have a question about the Axis ExCam XF P3807 and is the answer not in the manual?
General| Image Sensor | 4 x 1/2.5” progressive scan RGB CMOS |
|---|---|
| Operating Temperature | -60 °C to 60 °C (-76 °F to 140 °F) |
| Material | Stainless steel (316L) |
| Camera Type | Dome |
| Ingress Protection | IP66 |
| Network Connectivity | Ethernet 10/100 Mbps |
| Video Compression | H.264, Motion JPEG |
| Frame Rate | 30 fps |
| Audio Compression | AAC-LC, G.711, G.726 |
| Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X |
| Power | PoE+ IEEE 802.3at |
| Casing | Stainless steel (316L) |
Locate Axis devices and assign IP addresses on the network.
Guide for setting a secure root password and password recommendations.
Adjusting image, leveling camera, and camera position.
Guides on selecting exposure modes for optimal image quality.
Setting up overlays, reducing bandwidth, and configuring network storage.
Setting up rules for events, triggers, and recordings upon detection.
Overview of accessing the interface and viewing status information.
Playing live video, freezing, snapshots, and managing recordings.
Configuring system settings including date, time, and IPv4 network parameters.
Implementing IEEE 802.1x, preventing brute-force attacks, and IP filtering.
Managing user accounts, anonymous access, and configuring event rules.
Managing network storage and onboard SD card settings.
Restarting, restoring, or resetting the device to factory default settings.
Upgrading and rolling back device firmware versions.
Resetting device to factory defaults and managing firmware options.
To Next Page
