Need help?Do you have a question about the Axis Q1941-E and is the answer not in the manual?
General| Form factor | Bullet |
|---|---|
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Aluminum |
| International Protection (IP) code | IP67 |
| Maximum resolution | 384 x 288 pixels |
| Supported video modes | - |
| Image quality adjustment | Brightness, Contrast, Sharpness |
| Video compression formats | H.264, M-JPEG, MPEG4 |
| Optical zoom | - x |
| Fixed focal length | 19 mm |
| Temperature sensor | Yes |
| Security algorithms | 802.1x RADIUS |
| Angle of rotation | 270 ° |
| Minimum illumination | - lx |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Wi-Fi | No |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3af |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4/v6, HTTP, HTTPS b, SSL/TLS b, QoS 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP T M, SNMP v1/v2c/v3 (MIB - II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RT CP, ICMP, DHCP, ARP, SOCKS, SSH |
| Internal memory | 256 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Power source type | PoE |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -40 - 60 °C |
| Operating relative humidity (H-H) | 10 - 100 % |
| Bundled software | AXIS Camera Companion, AXIS Camera Station |
| Type | IP security camera |
| Languages support | CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, KOR, POR, RUS |
| Number of languages | 11 |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Audio formats supported | AAC, ADPCM, G.711, PCM |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Weight | 2000 g |
|---|
Defines DANGER, WARNING, CAUTION, NOTICE, IMPORTANT, and NOTE message levels.
Identifies key connectors like Network and I/O, and control buttons.
Instructions for accessing the product's web interface via a browser.
Details different H.264 streaming methods (Unicast RTP, RTSP, HTTP) and limitations.
Provides shortcuts to essential settings like Users, TCP/IP, Date & Time, Video, and Audio.
Guide to configuring video stream settings via Image, Audio, H.264, and MJPEG tabs.
Enabling and configuring shock detection sensitivity for tamper alerts.
Configuring audio detection levels to generate alarms based on sound thresholds.
Factors affecting VMD accuracy like object size, weather, and vibrations.
Guide to configuring VMD settings like include/exclude areas and visual confirmation.
Defining action rules with triggers, schedules, and actions for event handling.
Accessing and listing recorded video stored on SD card or network share with filter options.
Procedure for resetting the product to factory default settings, including IP address.
Step-by-step guide to download and install the latest firmware for the product.
Steps to recover the product if firmware upgrade fails or connection is lost.
To Next Page
