Axis Q7436 - Live View and PTZ Controls

AXISQ7436VideoEncoderBlade
Howtoresettofactorydefaultsettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultresetsall
settings,includingtheIPaddress,tothefactorydefaultvalues.
Note
ForproductswithmultipleIPaddresseschannel1willhavetheaddress192.168.0.90,
channel2willhavetheaddress192.168.0.91andsoon.
Toresettheproducttothefactorydefaultsettings:
1.Pressandholdthecontrolbuttonandtherestartbuttonatthesametime.
2.Releasetherestartbuttonandholdthecontrolbutton.
3.KeepthecontrolbuttonpresseduntilthePowerindicatorturnsgreenandthe6Status
indicatorsturnamber(thismaytakeupto15seconds).
4.Releasethecontrolbutton.WhentheStatusindicatorsdisplaygreen(whichcantakeup
to1minute)theprocessiscompleteandtheunithasbeenreset.
5.Theprocessisnowcomplete.Theproducthasbeenresettothefactorydefault
settings.IfnoDHCPserverisavailableonthenetwork,thedefaultIPaddressis
192.168.0.90-95
Note
Toresetasinglechanneltotheoriginalfactorydefaultsettings,usethebuttonprovidedin
thatproduct’swebpage.
Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSetup>
SystemOptions>MaintenanceandclickDefault..
10