Need help?Do you have a question about the Axis Q8665-E and is the answer not in the manual?
General| Model | Axis Q8665-E |
|---|---|
| Digital Zoom | 12x |
| Day/Night | Yes |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Type | PTZ Network Camera |
| Image Sensor | 1/2.8" CMOS |
| Pan Range | 360° |
| Compression | H.264, H.265 |
| Video Compression | H.264, H.265 |
| Frame Rate | Up to 30 fps |
| Audio Compression | AAC, G.711 |
| Audio Input/Output | Line output |
| Ethernet | 10BASE-T/100BASE-TX |
| Power over Ethernet | Yes |
| Network Protocols | IPv4, IPv6, HTTP, HTTPS, FTP, RTSP, RTP, UDP |
| Security | Password protection, IP address filtering |
| Power | 24 V AC |
| Resolution | 4K UHD (3840 x 2160) |
| Operating Temperature | -40 °C to 50 °C (-40°F to 122°F) |
Describes connectors, control button, and LED indicators.
Steps to access via browser and remote internet access.
Setting root password, power frequency, and live view page overview.
Explains PTZ controls like joystick, focus, presets, and pan/tilt/zoom bars.
Details on H.264 streaming methods and MJPEG stream characteristics.
Essential configuration steps before product use.
Configure video streams, image quality, and pixel counter.
Saving and setting specific camera views and the home position.
Configuring alarms for tampering and motion detection.
Defining conditions and actions for event triggers like motion detection.
Setting up user roles, anonymous login, and ONVIF.
Configuring secure HTTPS access and network authentication.
Basic network configuration including IP addressing.
Procedures for resetting settings and uploading files.
Steps to check and upgrade the product's firmware.
To Next Page
