Axis Q8685-E - Reset to Factory Default Settings

AXISQ8685-EPTZNetworkCamera
Resettofactorydefaultsettings
CAUTION
Riskofinjury.Movingparts.Keepyourbodypartsawayfromtheproductwhenin
operation.Disconnectfrompowersupplybeforeinstallingorperformingmaintenance
ontheproduct.
CAUTION
Riskofinjury.Hotsurface.Donottouchtheproductwheninoperation.Disconnect
frompowersupplyandallowthesurfacestocoolbeforeperformingmaintenanceon
theproduct.
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultwillreset
allsettings,includingtheIPaddress,tothefactorydefaultvalues.
Note
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpageson
www.axis.com/support/downloads
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Removethefourtopcoverscrewsandremovethetopcover.
3.ChangethepositionoftheFactorydefaultswitch,seeHardwareoverviewonpage10.
4.Replacethetopcoverandtightenthescrews(torque3.0Nm).
5.Re-connectpowertotheproduct.
Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSetup>
SystemOptions>MaintenanceandclickDefault.
24