Axis Q8685-E - Page 63

AXISQ8685-EPTZNetworkCamera
Aboutsystemoptions
Toresettheproducttofactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Changethepositionofthefactorydefaultswitch.Formoreinformationonhowtoaccesstheswitch,seetheInstallation
Guide.
3.Re-connectpowertotheproduct.
Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSetup>SystemOptions>Maintenanceand
clickDefault.
63