Index of Contents
2
Declaration of Conformity
Copied from CE Certificate
The undersigned, Huibo Wang
Authorised by Laizhou Chunlin Machinery Co., Ltd
No. 269 Baoshi Road Wenfeng Street Laizhou City,
Shandong 261400 P.R. China.
Model Number MJ10-SB250
Circular Saw Bench
Manufactured by Laizhou Chunlin Machinery Co., Ltd.
is in compliance with the standards determined in
the following Council Directive.
EN 55014-1:2006+A1+A2
EN 61000-3-2 : 2006+A1+A2
EN 61000-3-3 : 2008
EN 55014-2 : 1997+A1+A2
Warning
The symbols below advise that you follow
the correct safety procedures when using
this machine.
Fully read manual
and safety instructions
before use
Eye protection
should be worn
Ear protection
should be worn
HAZARD
Motor gets hot
Dust mask
should be worn
Index of Contents 02
Declaration of Conformity 02
What’s Included 03-04
Optional Accessories 05-06
General Instructions for 230V Machines 07-08
Specific Instructions/Precaution for the Saw Table 08
Specification 09
Assembly 09-10-11-12-13-14-15-16-17-18
Illustration and Parts Description 19-20-21
Setup and Adjustments 22-23-24
Operating Instructions 25-26
Changing the Saw Blade 26-27
Parts Breakdow/List 28-29-30-31
Wiring Diagram 31
To Next Page
Loading...
