What’s Included
3
Quantity Item Part Model Number
MJ10-SB250
(Basic Table Saw Assembly) (Kit Code: 508211)
1 No Basic Table Saw A
1 No Saw Guard with Flexible Hose B
1 No Dust Extraction Moulding
with four Phillips Screws C
1 No Mitre Fence Assembly D
1 No (Short) Rip Fence and Clamping Assembly E
1 No (Short) Fence Rail with Scale F
1 No Bag Containing G
2 No Screwdrivers G1
1No Hose Clip G2
2 No 10-12mm Spanners
1 No 13-15mm Spanner G3
1 No 17-19mm Spanner
1 No 3mm and 4mm Hex Keys G4
1 No Push Stick G5
2 No Operating Wheel Handles G6
(Optional Stand Assembly) (Kit Code: 508213)
4 No Leg A” Frames H
4 No Long Struts I
4No Short Struts J
4 No Rubber Feet K
1 No Bag Containing L
32 No M8x16mm Coach Bolts with Nuts L1
4 No M8x16mm Bolts with Large Washer and Nut L2
(Optional R/H Extension Table Assembly) (Kit Code: 508212)
1 No Extension Table M
2 No (Long) Front and Rear Fence and Table
Extension Rail arms N
1 No Bag Containing O
6 No M6x25mm Panhead Phillips Screws O1
6 No M6x25mm Panhead Phillips Screws with Square Nuts O2
6 No M6x16mm Panhead Phillips Screws with Square Nuts O3
3 No M6x16mm Bolt Washer and Nut O4
1 No 30mm Hose Support Bracket P
1 No (Long) Rip Fence Assembly Q
(Optional Sliding Table Assembly) (Kit Code: 508214)
1 No Angle Fence R
1 No Angle Fence End Block with two Phillips screws R1
1 No Work Clamp Assembly S
1 No Flip Over Stop T
1 No Work Clamp and Connecting Blocks U
2 No Sliding Carriage Support Arms V
1 No Bag Containing W
4 No M6x35mm Bolt and nut W1
4 No M6x45mm Countersunk Head and Washer/Nut W2
4 No M6x16mm Bolt and Washer/Nut W3
2 No M8x10mm Bolt and Domed Nut (Carriage Arm Stop) W4
1 No Carriage Arm X
1 No Sliding Carriage Table Y
To Next Page