AXTON c608 - Specifications

31
30
SPECIFICATIONS
I
AXTON 5-Channel System Amplifier C608
Rated power output mono/stereo (at 13.8V)
Satellites (Front+Rear) at 4 Ohms (2 x stereo) min.
4 x 50 W RMS
Subwoofer (mono) at 4 Ohms min.
1 x 155 W RMS
Rated power output mono/stereo (at 13.8V)
Satellites (Front+Rear) at 2 Ohms (2 x stereo)
4 x 65 W
Subwoofer (mono) at 2 Ohms
1 x 255 W
Frequency response (Sub+Front+Rear)
10 - 30.000 Hz
Total Harmonic Distortion (THD) at 4 Ohms
< 0.05 %
Signal to noise ratio
> 95 dB
Channel separation
> 55 dB
Crossover slope highpass and lowpass
12 dB/oct
Adjustable highpass frequency range
40 - 240 Hz
Adjustable lowpass frequency range
40 - 240 Hz
Recommended cross-section with 5m powercable
20 mm
2
Input impedance 47 k Ohms
Input sensitivity
0.2 - 9 V
Damping factor
> 250@ 4Ω / 20Hz
Thermal cut-off
85 °C
Fuse
3 x 25 A
Recommended main fuse at car battery with 20 mm
2
power cable 60 A
Dimensions (W x H x L)
256 x 53 x 410 mm
Specifications subject to change without notice.
AXTON is a registred trademark of ACR AG, Bohrturmweg 1, CH-5330 Zurzach, Switzerland.