Azbil FL7M Series - SPECIFICATIONS; About Setting Indication

SPECIFICATIONS
ABOUT SETTING INDICATION
FL7M-3T7HD(-CN,-CN03) FL7M-7T7HD(-CN,-CN03) FL7M-10T7D(-CN,-CN03)
0 to 2.1 mm 0 to 4.9 mm
10% max. of sensing distance
40 to 250 Vac, 20 to 250 Vdc
–25 to +70˚C –10 to +60˚C
0 to 7 mm
10±1 mm
When AC power supply is used 25Hz
When DC power supply is used 1 KHz
When AC power supply is used 25Hz
When DC power supply is used 500 Hz
When AC power supply is used 25Hz
When DC power supply is used 400Hz
±10% max. for the range of –25 to +70˚C when +25˚C is taken as standard temperature in sensing distance.
–10 to +60˚C
4,000 Vac, 50/60 Hz for 1minute
Ni-plated brass
PBT
-CN:Ni-plated Zn, -CN03:polyester elastomer
-CN:Sn-plated brass, -CN03:Gold-plated brass
980 m/s
2
10 time in X,Y and Z directions
IP67 (IEC standard), IP67G (JEM standard)
Approx. 90 g
Main unit with 2 m pre-leaded cable
Approx. 160 g
Main unit with 2 m pre-leaded cable
Approx. 270 g
Main unit with 2 m pre-leaded cable
FL7M
Standard (pre-leaded type)
Switch
switch
switch
switch
1 2