22
AB-7329
Handling
CAUTION
Do not block the ventilation holes of this product.
Doing so may cause device failure.
IMPORTANT
If more than the rated power voltage is accidentally applied to this product, replace the product with
a new one for your safety.
Failure to do so may cause device failure or cause re.
z Notes before power-on
• Check again that the wiring is done correctly.
• Peel o the protective sheets before powering the device on.
Notes:
1. Check that all protective sheets have been peeled o thoroughly.
2. If foreign substances may get into the product through holes during the period after the completion of installation and wiring but
before the unit is powered on, block the ventilation holes with plastic sheets, etc., on the surfaces (on the sides and bottom) that
are not covered with protective sheets.
Figure 11. Protective sheet
WARNING
Do not touch electrically charged parts.
Doing so may cause electric shock.
To Next Page
Loading...
