Azbil RJ-1 Series - Page 24

Specifications are subject to change without notice.
https://www.azbil.com/
Building Systems Company
24
AB-7329
Rev. 5.0 Jul. 2020
(J: AI-7420 Rev. 4.1)
Install this product in a panel cabinet. Additionally, always keep the panel cabinet accessible only to people with
su󰀩cient knowledge concerning electrical equipment.
This product complies with the following harmonised standards of the Radio Equipment Directive (RED), the
Electromagnetic Compatibility Directive (EMCD), the Low Voltage Directive (LVD) and the Restriction of
Hazardous Substances Directive (RoHSD).
RED: EN 300 330
EMCD: EN 61326-1 Class A, Table 2 (for use in an industrial electromagnetic environment)
EN 301 489-1 / EN 301 489-3
LVD: EN 61010-1 Overvoltage category II
Pollution degree 2
RoHSD: EN 50581
If compliance with CE marking is required, provide an EMC lter on the LAN cable that connects to RJ-11_ _W_
_ _ _.
* BACnet
®
is a trademark of ASHRAE.