EasyManua.ls Logo

Aztec EDGEWINDER - ENGINE TROUBLESHOOTING GUIDE; ENGINE STARTING AND RUNNING ISSUES; ENGINE OVERHEATING AND EMISSION PROBLEMS

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
EDGEWINDER OWNER’S MANUAL PAGE 24
05-2017
ENGINE TROUBLESHOOTING
SOLUTIONS *
Battery may be discharged; recharge battery
Engine oil level may be low; fill with recommended
oil to the proper level (see pgs 16-19)
Spark plug may be faulty, fouled, or improperly
gapped; correct the gap or replace spark plug (see
pg 21)
May be a regulator malfunction, ignition malfunction,
valves stuck, etc; replace or repair faulty
components as necessary
Refill cylinder
Open valve
Remove obstruction or replace line
Connect lead to spark plug
Set controls to correct positions
Replace coil
Replace switch
Replace regulator
Set controls to correct position
Remove obstruction or replace line
Replace regulator
Take engine to an authorized HONDA servicing
dealer
Charge or replace battery
Tighten, repair or replace wires
Repair or replace switch(es)
Have engine serviced
Clean and clear debris or replace filter
Check and add oil
Have engine serviced
Replace air filter
Tighten or seal; check with soap and
Filter elements may be restricted; clean or replace
filter elements (see pg 20)
May be a regulator malfunction, ignition malfunction,
valves stuck, etc; replace or repair faulty
components as necessary
* Remember that an authorized HONDA servicing dealer knows your engine best and is fully equipped to maintain and
repair it. To ensure the best quality and reliability, use only new genuine Honda parts or their equivalents for repair and
replacement.

Related product manuals