d. If you want to hide the Network from active scans, simply tick the
Non-Broadcast SSID checkbox.
NOTE: By ticking the Non-Broadcast SSID checkbox, you would
have to manually connect to your FG7008GR(AC)’s SSID.
e. Change the Network Authentication method to Mixed WPA2/
WPA-PSK.
f. Input your preferred password on the WPA Pre-shared key input
box, and verify the input password by clicking the Click here to
display button.
g. Click the Save/Apply button to save and apply changes. You may
also change the other wireless band’s password if desired.
h. Connect your wireless devices again to either of the
FG7008GR(AC)’s 2.4GHz or 5.0GHz wireless SSIDs.
NOTE: You may have to write down or save your new password for
future reference.
d
f
e
To Next Page
Loading...
