STEP 2: Connecting your Wireless
Devices
Every FG7008GR(AC) device has been configured with a unique Wireless
Network Name (SSID) and Network Key (wireless password). These
details are displayed on the device label sticker located on the side of
your FG7008GR(AC) as seen below.
2.1 DEFAULT NETWORK NAME AND NETWORK KEY
• For any changes in your wireless router, you will have to
connect again to the wireless network of your FG7008GR(AC).
• Do take note that your Dual Band Wireless Router will
broadcast two Wireless SSIDs (one for both 2.4GHz and
5.0GHz bands as seen above).
• The 5.0GHz SSID (wireless network name) will only be visible
to your wireless device if it has a dual band support.
ADDITIONAL NOTES :
** The Default SSIDs (Wireless Network
Name) and Network Key (Password) of both
the 2.4GHz and 5.0GHz band can be seen on
the label sticker. You may proceed to Section
2.4 of STEP 2 if you wish to change the
Wireless Password of your FG7008GR(AC).
To Next Page
Loading...
