User Manual
Page 77 of 88
Bridge. Allows you to configure the wireless bridge features of the
wireless LAN interface.
Enabled. Enables wireless bridge restriction, with bridges
selected in Remote Bridges having access.
Disabled. Disables bridge restriction. All wireless bridges will be
granted access.
To configure the wireless bridge:
1. Select the Bridge Restriction.
2. Input the Remote Bridges MAC Addresses.
3. Click Apply/Save to save and apply changes.
Advanced. Allows you to configure the Advanced features of
the wireless LAN interface. You can select a particular channel
on which to operate for the transmission to consistently stay on a
particular speed, set preferred fragmentation/RTS threshold,
identify wakeup intervals for clients in power save mode,
determine a beacon interval for the access point, and other
advanced wireless properties.
To Next Page
Loading...
Need help?
General
