User Manual
Page 23 of 88
Network Configuration
The Home Network Configuration menu allows you to configure your router’s
IP Address and Subnet Mask for LAN interface. You may also configure the
DHCP server and Public IP Pass Through settings of your router through this
page. It has the following sections:
A. Local Area Network (LAN) Setup. Allows you to configure various IP
properties which will be used by your router and or implemented
throughout the network.
To configure the LAN Setup, you may follow the steps below:
1. Enter the preferred IP Address and corresponding subnet mask
that you wish to assign to your FG7008GR(AC).
NOTE: The IP Address to be specified in this area will be the new
default IP Address you would be using to access your
FG7008GR(AC) web user interface.
To Next Page
Loading...
